ANALISIS KINERJA EVAPORATOR PADA SISTEM ORGANIC RANKINE CYCLE KAPASITAS 500KW

Authors

  • Wahidin Wahidin Universitas Ibn Khaldun Bogor
  • Yogi Sirodz Gaos Universitas Ibn Khaldun Bogor
  • Irvan Wiradinata Universitas Ibn Khaldun Bogor

DOI:

https://doi.org/10.32832/almikanika.v1i1.2010

Abstract

This research is observes an evaporator performance in the Organic Rankine Cycle (ORC) 500 kW power plant. The purpose of this research is to analyse the efficiency and performance the evaporator. The working fluid used in this ORC system is n-pentane (C5H12). Several parameters which were taken into consideration during the thermal calculation are: Thermodynamic; Properties of working fluid based on Refrop; and the ORC’s efficiency. Moreover, this research used Heat Transfer Research Inc (HTRI) in order to compare manual and software-based calculation. This calculation shows that 8,64 percent overdesign deviation (1741 tube by manual calculation while 1782 by software-base calculation). Data obtained for this research shows that the hot water circulation in the tube side has a mass flow of 28.828 kg/s, an inlet temperature of 164.99 C , an outlet temperature of 134.99 C . Meanwhile, in the shell side (n-pentane) has an inlet temperature of 91.61 C , an outlet temperature of 140.43 C and a mass flow 10.213 kg/s. The results show that the evaporator has an efficiency of 66.5 percent, Q hot water ( = 3632 kW, latent heat and sensible heat = 3886.95 kW.

References

Bao, J., & Zhao, L. (2013). A review of working fluid and expander selections for organic Rankine cycle. Renewable and sustainable energy reviews, 24, 325-342.

Cengel, Y. A., & Pérez, H. (2004). Heat transfer: a practical approach. transferencia de calor.

Gaos, Y. S., Juarsa, M., Marzuki, E., & Yulianto, M. (2015). Pemilihan fluida kerja pada pengembangan Organic Rankine Cycle. AME (Aplikasi Mekanika dan Energi): Jurnal Ilmiah Teknik Mesin, 1(1), 34-38.

Ihsan, S. (2017). Perencanaan dan Analisa Perhitungan Jumlah Tube dan Diameter Shell pada Kondensor Berpendingin Air pada Sistem Refrigerasi NH 3. J. Teknol. PROSES DAN Inov. Ind, 2(1), 14-15.

Nugraha, A. V., & TK, B. F. (2015). Desain Alat Penukar Kalor Jenis Shell and Tube Sebagai Evaporator Untuk Pembangkit Listrik Tenaga Panas Bumi Suhu Rendah Dengan Menggunakan Sistem Organic Rankine Cycle (Orc). JURNAL TEKNIK MESIN, 3(3), 326-335.

Roy, J. P., Mishra, M. K., & Misra, A. (2011). Performance analysis of an Organic Rankine Cycle With Superheating Under Different Heat Source Temperature Conditions. Applied Energy, 88(9), 2995-3004.

Sirodz, Y. (2018). Optimasi Desain Alat Penukar Kalor Gas Buang untuk Pemanas Air Degreaser. TEKNOBIZ: Jurnal Ilmiah Program Studi Magister Teknik Mesin, 8(3), 94-100.

Veriyawan, R., & Biyanto, T. R. (2014). Optimasi Desain Heat Exchanger dengan Menggunakan Metode Particle Swarm Optimization. Jurnal Teknik ITS, 3(2), B210-B215.

Downloads

Published

2019-01-02

How to Cite

Wahidin, W., Gaos, Y. S., & Wiradinata, I. (2019). ANALISIS KINERJA EVAPORATOR PADA SISTEM ORGANIC RANKINE CYCLE KAPASITAS 500KW. ALMIKANIKA, 1(1). https://doi.org/10.32832/almikanika.v1i1.2010