Implementation of Circular Economy Principles in Building Construction Waste
DOI:
https://doi.org/10.32832/astonjadro.v13i1.14547Keywords:
building project; construction waste; linear economy; circular economy; cost saving.Abstract
Building projects often generate significant amounts of waste. This happens because the building projects mostly adopts a linear economic model of “take, make, dispose of”, using materials to the construction of buildings and disposing them at the end of life. This linear economic model only focuses on human activities because the disposal of materials ultimately does not become a sustainable practice in the future. For this reason, an alternative is needed in reducing and processing the construction waste by implementing circular economy principles. This study aims to identify type of construction waste in building project, provide recommendations for handling it with circular economy principles, and calculating the cost savings. The method that used in this study are field observation and interview for collecting data. The result showed that steel reinforcement, ready-mix concrete, light brick, ceramic, multiplex, spun pile, and anchor can be handled with circular economy principles are reduce, reuse, recycle, recovery, and repair. The cost savings from handled it in project A, B, and C are Rp. 68.252.490,65, Rp. 84.182.684,96, and Rp. 31.794.238,51, respectively.
References
Amdani, S. E., Paikun., Saepurrahman, D. & Susanto, D. A. (2023). Analysis of the compressive strength of concrete from brick wall waste as a concrete mixture. ASTONJADRO, 12(1):150-162.
Apriyadi, Y. (2020). Pemanfaatan Limbah Serbuk Besi dari Sisa Pengerjaan Bubut Besi Sebagai Bahan Pengganti Agregat Halus pada Campuran Beton dengan Faktor Air Semen (FAS) 0,4. Universitas Islam Riau. Avaliable at Google Scholar
Aulia, N. A. (2016). Analisis dan Evaluasi Sisa Material Konstruksi Menggunakan Metode Pareto dan Fishbone Diagram (Studi Kasus pada Proyek Pembangunan Gedung Pascasarjana Universitas Islam Malang. Universitas Brawijaya. Avaliable at Google Scholar
Bao (2023). Developing circularity of construction waste for a sustainable built environment in emerging economies: New insights from China. Developments in the Built Environment 13 (2023) 100107.
Benachio, G. L. F., Freitas, M. D. & Tavares, S. F. (2020). Circular Economy in the Construction Industry: A Systematic Literature Review. Journal of Cleaner Production 260 (2020) 121046. https://doi.org/10.1016/j.jclepro.2020.121046.
Devi, K. (2021). Analisis dan Evaluasi Sisa Material Kontsruksi pada Proyek Pembangunan Gedung Kuliah 4 Lantai Universitas Muhammadiyah Riau. Universitas Islam Riau. Avaliable at Google Scholar
Devia, Y. P., Unas, S. E., Nariswari, W. (2010). Identifikasi Sisa Material Konstruksi dalam Upaya Memenuhi Bangunan Berkelanjutan (Construction Waste Identification for Complying Sustainable Building). Jurnal Rekayasa Sipil, 4(3), 195–203.
Ervianto, W. I., Soemardi, B. W., Abduh, M. & Surjamanto. (2012). Kajian Reuse Material Bangunan dalam Konsep Sustainable Construction Di Indonesia. Jurnal Teknik Sipil, 12(1), 18–27.
Fajar, S., Puspasari, V. H. & Waluyo, R. (2018). Evaluasi dan Analisa Sisa Material Konstruksi. Jurnal Teknika, 1(1):125-135.
Ferdiana, M. D. (2009). Studi Mengenai Sisa Material pada Proyek Gedung dan Perumahan. Universitas Atma Jaya. Avaliable at Google Scholar
Hao, J. L., Yu, S., Tang, X. & Wu, W. (2022). Determinants of Workers’ Pro-Environmental Behaviour Towards Enhancing Construction Waste Management: Contributing to China’s Circular Economy. Journal of Cleaner Production 369 (2022) 133265.
Haryadi, D. (2018). Analisa Sistem Pengendalian Sisa Material Pekerjaan Arsitektural pada Proyek Konstruksi. Universitas Islam Indonesia. Avaliable at Google Scholar
Hemar, M. A. S. & Risdianto, Y. (2020). Penggunaan Limbah Tiang Pancang Sebagai Agregat Kasar pada Pembuatan Beton Mutu Normal dengan Variasi Faktor Air Semen. Jurnal Rekayasa Teknik Sipil, 2(5):1-8.
Kementerian Pekerjaan Umum Perumahan Rakyat. (2015). Perbaikan Kerusakan Berdasarkan Bahan. Bandung: Kementerian PUPR.
Kusuma, V. A. (2010). Evaluasi Sisa Material pada Proyek Gedung Pendidikan dan Laboratorium 8 Lantai Fakultas Kedokteran UNS Tahap 1. Universitas Sebelas Maret. Avaliable at Google Scholar
Lumbangaol, P.H. & Sihombing, M.M. (2016). Pengelolaan Limbah Konstruksi di Medan. Jurnal Fakultas Teknik, 2(2).
Maulana, D. (2015). Pemanfaatan Limbah Keramik (Tile) untuk Pengembangan Produk Elemen Mosaic pada Dinding (Studi Kasus pada Usaha Kecil Mozaik di Cimahi). Jurnal Universitas Pembangunan Jaya, 2(2):117-125.
Nursyahbani, H. (2016). Analisis dan Evaluasi Sisa Material Konstruksi Menggunakan Fault Tree Analysis (FTA) (Studi Kasus pada Proyek Pembangunan Gedung Pascasarjana Universitas Islam Malang). Universitas Brawijaya. Avaliable at Google Scholar
Pertiwi, I. M., Herlambang, F. S. & Kristinayanti, W. S. (2019). Analisis Waste Material Konstruksi Pada Proyek Gedung (Studi Kasus pada Proyek Gedung Di Kabupaten Badung). Jurnal Simetrik, 9(1):185-190.
Priyono, S. A. & Agustapraja, H. R. (2021). Limbah Bata Ringan untuk Bahan Campuran Agregat Halus terhadap Kuat Tekan pada Beton K-250. Jurnal Teknik, 19(1):23-31.
Purnawan, M., Manullang, R. J. & Wahyudi, K. (2020). Cullet dalam Ekonomi Sirkular Industri Kaca. Jurnal Keramik dan Gelas Indonesia, 29(2):139-151.
Putra, I. G. P. A. S., Dharmayanti, G. A. P. C. & Dewi, A. A. D. P. (2018). Penanganan Waste Material pada Proyek Konstruksi Gedung Bertingkat. Jurnal Spektran, 6(2):176-185.
Rifdah, D. N. (2021). Identifikasi Tingkat Kesadaran Pemangku Kepentingan terhadap Penerapan Circular Economy pada Industri Konstruksi di Balikpapan. Institut Teknologi Kalimantan. Avaliable at Google Scholar
Sari, F. (2016). Studi Pemanfaatan Pasta Beton Sisa Pengecoran. Universitas Narotama Surabaya. Avaliable at Google Scholar
Taher, T., Suharwanto & Komarudin. (2020). Agregat Beton Daur Ulang dari Limbah Bata Ringan sebagai Subsitusi Agregat Natural pada Beton Normal. Jurnal Rekayasa Infrastruktur, 6(2):19-27.
Tian, Y & Spatari, S. (2022). Environmental Life Cycle Evaluation of Prefabricated Residential Construction in China. Journal of Building Engineering 57 (2022) 104776. https://doi.org/10.1016/j.jobe.2022.104776
Utomo, N. (2018). Uji Eksperimental Kuat Tekan Beton dengan Dua Tipe Campuran Agregat Kasar Daur Ulang dan Limbah Keramik. Universitas Katolik Parahyangan. Avaliable at Google Scholar
Wu, W., Xie, L. & Hao, J. L. (2022). An integrated trading platform for construction and demolition waste recovery in a circular economy. Sustainable Chemistry and Pharmacy 25 (2022) 100597. https://doi.org/10.1016/j.scp.2022.100597.
Yu, Y., Junjan, V., Murat, D. & Lacob, M. (2022). A Systematic Literature Review on Circular Economy Implementation in the Construction Industry: A Policy-making Perspective. Resources, Conservation & Recycling 183 (2022) 106359. https://doi.org/10.1016/j.resconrec.2022.106359.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 ASTONJADRO
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Paper submitted to ASTONJADRO is the sole property of the Astonjadro Journal. Unless the author withdraws the paper because he does not want to be published in this journal. The publication rights are in the journal Astonjadro.ASTONJADRO
LICENSE
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://ejournal.uika-bogor.ac.id/index.php/ASTONJADRO
