Analysis Value Engineering at Work Apartment Building Wall
DOI:
https://doi.org/10.32832/astonjadro.v13i1.14713Keywords:
optimization source power; value engineering; work wall.Abstract
It was Optimizing resources to analyze cost efficiency in implementing construction projects. One method that can be used for resource optimization is value engineering (VE). Value engineering (VE) as a management technique to determine the efficiency between the cost and performance of a product or project and stay on appearance, quality and maintenance. Then value engineering is applied to the construction of apartment buildings to get cost efficiencies from the initial budget planning. This study aims to determine the effectiveness of value engineering in the construction of apartment buildings, especially in-wall installations. The VE method consists of five stages: Information stage, the creativity stage, the analysis stage, the development stage, and the presentation stage. Information stage, data collection in the form of cost planning, detail engineering design, work plan and terms. Based on the data obtained, the total contract value for the apartment building is Rp. 87,328,000,000. wall installation as one of the highest cost contributors. There are two alternative recommendations, namely sandwich panel walls and precast walls. The analysis found that the sandwich panel wall has the most efficient value, namely the total RAB value of 2.5% from the initial plan.
References
Berawi , M.A. (2014). Value Engineering Applications in Industry Construction Building. Jakarta: University of Indonesia Press.
Bertolini, V., Wisnumurti, W., & Zacoeb, A. (2015). Application of Value Engineering in Building Construction Projects (Study The case of the Grand Banjarmasin Hotel). NJTS: Naruto Journal of Civil Engineering, 1 (2).
Diputera, IGA, Putera, IGAA, & Dharmayanti, GAPC (2018). Application of Value Engineering (VE) in the Taman Sari Apartement Development Project. Journal Spectrant, 6(2), 210-216.
Fardiana, F. (2020). ANALYSIS OF IMPLEMENTATION OF VALUE ENGINEERING IN THE STRUCTURE OF RA. BASOENI MOJOKERTO (Doctoral dissertation, Islamic University of Majapahit).
Firdaus, IAS (2019). Comparison Estimation Cost Work Red Brick Wall, Light Brick, Brick and M Panel (Study Case: SATLANTAS POLRES Sleman).
Koilam, VT, Arsjad, TT, & Dundu, AK (2020). IMPLEMENTATION METHOD OF FLOOR PLATE FLOOR PLATE OFFICE AND DISTRIBUTION CENTER BUILDING PT. SUKANDA JAYA AIRMADIDI–NORTH MINAHASA. STATIC CIVIL JOURNAL, 8(5).
Limenta, WS (2018). Comparative Analysis Method Implementation of Cast in Situ with Precast on the Project Repair of ITS Industrial Engineering Laboratory Building. Final Project, Department of Civil Engineering, Faculty of Civil Engineering, Environment and Earth, Institute Technology Ten November, Surabaya.
Manto, J. (2016). Identify duration and Labor Based on Unit Price Analysis Work (AHSP) on Planning Work Residential Villa Idaman Boalemo. RADIAL: Journal Civilization of Science, Engineering, and Technology, 4(1), 38-52.
Miles, LD (1972). Techniques of Value Analysis and Engineering, Second Edition. New York: McGraw-Hill Book Company.
Najoan, CH, Tjakra, J., & Pratasis, PA (2016). Analysis method implementation of precast plates with conventional plates reviewed from time and cost (study case: headquarters command area Manado military). Journal Civil Static, 4(5).
O'Hegarty, R., & Kinnane, O. (2020). Review of precast concrete sandwich panels and their innovations. Construction and building materials, 233, 117145.
Rani, Hafnidar A. (2022). The concept of value engineering in management project construction. Sleman: DEEPUBLISH.
Regulation of the Minister of Work General No. 45/PRT/M/2007 concerning Technical Guidelines for the Construction of State Buildings.
SAVE International Value Standards. (2007). Value Standards and Body of Knowledge.
Suasira, IW, Gunawan, KW, Yuliadewi, NPA, & Partama, IGNE (2023). OPTIMIZING THE COST OF IMPLEMENTING BUILDING CONSTRUCTION WITH THE APPLICATION OF VALUE ENGINEERING (Case Study of the Service Building Project for the Sanjiwani Hospital, Gianyar). Journal of Gradient Engineering, 15(01), 75-81.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 ASTONJADRO
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Paper submitted to ASTONJADRO is the sole property of the Astonjadro Journal. Unless the author withdraws the paper because he does not want to be published in this journal. The publication rights are in the journal Astonjadro.ASTONJADRO
LICENSE
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://ejournal.uika-bogor.ac.id/index.php/ASTONJADRO