Marshall Test Comparison of Asphalt Mix PG 70 and Asphalt Pen 60/70 Based on Bina Marga General Specification
DOI:
https://doi.org/10.32832/astonjadro.v14i3.17847Keywords:
Marshall; flow; stability; ASTM; AASHTO.Abstract
Marshall Test Mix Asphalt PG 70 and Asphalt Pen 60/70. Marshall aims to determine the characteristic of the dough in the test object. In this case to know the values of durability (stability), melting (flow), & marshall Qouintient. The Marshall tool is a pressure sensor which is equipped with a proving ring with a capacity of 22.5 KN or 5000 IBS. The proving ring is equipped with a measuring watch which is useful for measuring the stability of the dough. Apart from that, there is still a flow meter to measure plastic melting, because the basic principle of the Marshall method is inspection of stability & melting (flow), and analysis of density & pores based on the dough that is formed. The dough design of the Marshall method was discovered by Bruce Marshall, & has been standardized by ASTM or AASHTO through several modifications, namely ASTM D 1559-76, or 27 AASHTO T T-245-90. The standard Marshall Test object is a cylinder with a diameter of 4 inches (10,16 cm) and a heigt of 2,5 inches (6,35 cm).
References
Bina Marga. (2018). Spesifikasi Umum 2018: Konstruksi Perkerasan Jalan dan Jembatan. Direktorat Jenderal Bina Marga, Kementerian Pekerjaan Umum dan Perumahan Rakyat.
Dias, A. (2022). Studi Karakteristik Marshall pada Aspal Modifikasi PG 70 dan Aspal Pen 60/70 dalam Perkerasan Jalan. Jurnal Teknologi Konstruksi, 7(1), 45-55.
Iwan, T. (2024). Pengembangan Teknologi Aspal Modifikasi Berbasis Performance Grade (PG 70). Jurnal Infrastruktur dan Transportasi, 10(2), 22-33.
Suardi, E., Fitri, R., & Sagita, D. C. (2022). Perbandingan Karakteristik Campuran Asphalt Concrete-Wearing Course (AC-WC) Menggunakan Aspal Pen 60/70 dan Aspal PG 76. Jurnal Ilmiah Rekayasa Sipil, 19(1), 94–100.
Kementerian PUPR. (2020). Pedoman Teknis Penggunaan Aspal Modifikasi Polimer untuk Peningkatan Kualitas Perkerasan Jalan. Direktorat Jenderal Bina Marga.
SNI 06-2489-1991. (1991). Metode Pengujian Campuran Aspal dengan Alat Marshall. Badan Standarisasi Nasional Indonesia.
Flaviana, L., Tilik, P., & Wibowo, D. (2021). Kajian Kinerja Campuran Aspal AC-WC Menggunakan Aspal PG 70 dan Aspal Pen 60/70. Jurnal Teknik Sipil Indonesia, 8(3), 66-78.
Prasetyo, H. (2019). Evaluasi Kinerja Campuran Aspal Berdasarkan Uji Marshall di Proyek Jalan Tol. Jurnal Infrastruktur dan Pembangunan, 12(4), 99-110.
Budi, S. (2020). Penggunaan Aspal Polimer dalam Perkerasan Jalan untuk Meningkatkan Durabilitas dan Stabilitas Aspal. Jurnal Konstruksi Indonesia, 9(2), 40-50.
Permana, A. F. (2021). Pengaruh Kadar Aspal pada Campuran AC-WC Terhadap Kualitas Perkerasan Jalan. Jurnal Transportasi dan Infrastruktur, 13(1), 85-95
S Syaiful, H Rusfana. (2022). Rigid Pavement Planning in Traffic: Case Study in Ciherang Road and Pemuda Road, Bogor Regency, INDONESIA. Journal of Applied Engineering Science 20 (2), 485-497.
Triyanto, T., Syaiful, S., & Rulhendri, R. (2020). EVALUASI TINGKAT KERUSAKAN JALAN PADA LAPIS PERMUKAAN RUAS JALAN TEGAR BERIMAN KABUPATEN BOGOR. ASTONJADRO, 8(2), 70–79. https://doi.org/10.32832/astonjadro.v8i2.2628
Mubarak, M., Rulhendri, R., & Syaiful, S. (2020). PERENCANAAN PENINGKATAN PERKERASAN JALAN BETON PADA RUAS JALAN BABAKAN TENGAH KABUPATEN BOGOR. ASTONJADRO, 9(1), 1–13. https://doi.org/10.32832/astonjadro.v9i1.2694
Muharam, R. (2020). PERENCANAAN TEBAL LAPIS PERKERASAN KAKU PADA RUAS JALAN KAPTEN DASUKI BAKRI. ASTONJADRO, 8(2), 57–69. https://doi.org/10.32832/astonjadro.v8i2.2617
Akbardin, J., & Sukma Permadi, G. (2014). KAJIAN PENGGUNAAN FILLER KAPUR PADA AC-WC HALUS SPESIFIKASI JALAN BINA MARGA 2010. ASTONJADRO, 3(2), 43–51. https://doi.org/10.32832/astonjadro.v3i2.814
Susanto Hariyadi, E., & Rulhendri, R. (2020). PENGARUH JENIS PEMBEBANAN DALAM ANALISIS STRUKTUR PERKERASAN LENTUR TERHADAP KINERJA PERKERASAN. ASTONJADRO, 2(2), 49–57. https://doi.org/10.32832/astonjadro.v2i2.798
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 ASTONJADRO
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Paper submitted to ASTONJADRO is the sole property of the Astonjadro Journal. Unless the author withdraws the paper because he does not want to be published in this journal. The publication rights are in the journal Astonjadro.ASTONJADRO
LICENSE
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://ejournal.uika-bogor.ac.id/index.php/ASTONJADRO
