ROAD GEOMETRIC FEASIBILITY IN ROAD SAGARANTEN – TEGALBULEUD KM.BDG 175 + 100
DOI:
https://doi.org/10.32832/astonjadro.v10i1.4213Keywords:
roads, geometric, alignment, Bina Marga, traffic.Abstract
The Sagaranten-Tegalbuleud road is a provincial road, with its geographic and topographic conditions quite complicated, the terrain quite difficult, causing not all areas to be well connected, and the reason for the low level of accessibility of this area. Therefore, determining the road geometry is an important part of driving comfort. Geometric planning focuses on horizontal and vertical alignments so that it can fulfill the basic functions of the road that provide optimal traffic flow comfort according to the planned speed. A re-survey was conducted to obtain geometric data on existing roads that did not comply with DGH standards, then it was re-planned. The results of the analysis are three bends with the Spiral-Circle-Spiral type, namely bend 9, bend 10 and bend 11 with RC = 17 m, and the slope is determined for the vertical geometrical alignment of the road. The results of this research analysis can be used as a reference for improving geometric roads so that accessibility between regions can be increased.
References
AASHTO. 2001. A Policy on Geometric Design of Highways and Streets, USA.
A Juang, P Danang, R Bambang, M Agus, Taufik, S Syaiful, 2020. MODELLING OF TRIPS ASSIGNMENT ANALYSIS FOR ROADS NETWORK SYSTEM BASED ON TRANSPORTATION NEEDS OF EXSPORT COMMODITY, ARPN Journal of Engineering and Applied Sciences 15 (21), 2463-2470. http://www.arpnjournals.org/jeas/research_papers/rp_2020/jeas_1120_8378.pdf
Bambang Irawan, Komala Erwan, Heri Azwansyah, 2020. Evaluasi Geometrik Jalan Serimbu-Ngabang Kecamatan Air Besar (Studi Kasus: Sta 19+100 Sampai Sta 20+000 Kabupaten Landak). (Indonesian). JeLAST Vol. 7 No. 3 2020. DOI: http://dx.doi.org/10.26418/jelast.v7i3.42665
B. Jatmika, M. Pallah, N. Akmaliyah, A. Sardi, R. F. K. Barkah and I. A. Darmawan, 2018. "The Evaluation on the Saturation Degree on Pelabuhan II Street of Sukabumi City," 2018 International Conference on Computing, Engineering, and Design (ICCED), Bangkok, Thailand, 2018, pp. 208-211, doi: 10.1109/ICCED.2018.00048 .
Direktorat Jenderal Bina Marga, 1997. Tata Cara Perencanaan Geometrik Jalan Antar Kota (No.038/TBM/1997). Jakarta: Kementrian Pekerjaan Umum RI. (Indonesian).
Herman Fithra, 2017. Konektivitas Jaringan Jalan Dalam Pengembangan Wilayah Di Zona Utara Aceh. Diterbitkan Oleh: CV. SEFA BUMI PERSADA – ACEH. (Indonesian).
Hendarsin, Shirley L. 2000. Penuntun Praktis Perencanaan Teknik Jalan Raya. Bandung: Politeknik Negeri Bandung. (Indonesian).
Heri Sutanto, 2020. Perencanaan Jalan Dengan Perkerasan Kaku (Rigid Pavement) Pada Jalan Rawa Indah Kota Sangatta Provinsi Kalimantan Timur. Jurnal Teknologi Sipil Vol. 2 No. 2. (Indonesian). http://e-journals.unmul.ac.id/index.php/TS/article/view/2185.
Muhammad Faridun Arif, Burhamtoro, Moch. Khamim, 2020. Perencanaan Geometrik Jalan Nasional Tanah Merah –Jalan Nasional Suramadu Kabupaten Bangkalan, Madura. JOS -MRK Volume 1, Nomor 3, Desember 2020, Page 151-156. (Indonesian). http://jos-mrk.polinema.ac.id/index.php/JOS-MRK/article/view/100/137
Muhammad Fhakrul Ricky, - Syaifuddin, Teuku Riyadhsyah, 2020. Perencanaan Alinyemen Vertikal Dan Alinyemen Horizontal Jalan Dengan Menggunakan Drone Sebagai Media Memperoleh Peta Kontur. Jurnal Sipil Sains Terapan Vol. 3 No. 2 2020. (Indonesian). http://e-jurnal.pnl.ac.id/index.php/JSST/article/view/2076
Paikun. 2020. Kunci Keberhasilan Dalam Penelitian. Live Session 7 Metodologi Penelitian, https://www.youtube.com/watch?v=9-vNg5x8FFU, diakses pada 4 Januari 2021 pukul 01.05 WIB. (Indonesian).
Peraturan Pemerintah, 2006. PP RI No. 34 tahun 2006 Tentang Jalan. (Indonesian).
Rozi, Akhmad Fatkhur, 2017. Evaluasi Perencanaan Geometrik Jalan Menggunakan Vehicles Tracking Analysis (Studi Kasus: Jalan Lingkar Luar Barat Kota Surabaya). Undergraduate thesis, Institut Teknologi Sepuluh Nopember. (Indonesian). http://repository.its.ac.id/id/eprint/43660
Silvia Sukirman. 2010. Perkerasan Lentur Jalan Raya. Bandung: Nova Pusat Pendidikan dan Pelatihan Jalan, Perumahan, Permukiman dan Pengembangan Infrastruktur Wilayah. 2017. Modul 3 Dasar – dasar Perencanaan Geometrik Ruas Jalan. Jakarta: Kementrian Pekerjaan Umum dan Perumahan Rakyat, Badan Pengembangan Sumber Daya Manusia. (Indonesian).
S Syaiful, D Hariyadi, 2019. CASE STUDY ON SUSTAINABLE T-JUNGTION CIBINONG CITY MALL (CCM) IN BOGOR INDONESIA, ARPN Journal of Engineering and Applied Sciences 14 (17), 2960-2971. http://www.arpnjournals.org/jeas/research_papers/rp_2019/jeas_0919_7895.pdf
S Syaiful, L Lasmana, 2020. A STUDY ON LEVEL OF RAILWAY ROAD DAMAGE WITH SUSTAINABLE PCI METHOD, ARPN Journal of Engineering and Applied Sciences 15 (8), 962-968. http://www.arpnjournals.org/jeas/research_papers/rp_2020/jeas_0420_8184.pdf
Supriyanto, Edi. Modul Autodesk Civil 3D Untuk Survey dan Perencanaan Jalan Raya. (Indonesian).
Tata Cara Perencanaan Geometrik Jalan Antar Kota No. 038/T/BM/1997. (Indonesian).
Undang-Undang RI, 2004. UU RI No. 38 tahun 2004 Tentang Jalan. (Indonesian).
Downloads
Published
How to Cite
Issue
Section
License
Paper submitted to ASTONJADRO is the sole property of the Astonjadro Journal. Unless the author withdraws the paper because he does not want to be published in this journal. The publication rights are in the journal Astonjadro.ASTONJADRO
LICENSE
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://ejournal.uika-bogor.ac.id/index.php/ASTONJADRO
