STRESS ANALYSIS PADA HORIZONTAL AXIS WIND TURBINE BLADE BERBAHAN KAYU

Penulis

  • Roy Waluyo Universitas Ibn Khaldun Bogor

DOI:

https://doi.org/10.32832/ame.v4i2.1537

Abstrak

The blade turbine is a component that experiences a very high stress on a wind turbine. Materials
often used are aluminum composite, polymer and even steel. Aluminum has a high fatigue. Plastic
is very suitable But it requires mold while steel has a great weight. Wood is an alternative material
for a blade turbine. Because it is lightweight, strong, easily shaped, and has high fatique resistance
and is easy to obtain. In this research, a stress analysis on a blade with balsa wood material with
fixed force 5 Newton is applied. The result of analysis by using Autodesk Inventor student version,
shows that the minimum Stress that occurs is: 12.1265 N / m ^ 2 and the maximum stress is:
955595 N / m ^ 2. The maximum stress occurs at the point / node 390 or the area near the
assembly hub or fixed geometry marked in red.

Referensi

L.M Galantucci ,I. Bodi, J. Kacani , F.

Lavecchia. 2015 “Analysis Of Dimensional

Performance For A 3d Open-Source

Printer Based Fused Deposition Modeling

Technique” Department of Production

and Management – Polytechnic

University of Tirana, Albania.

M.N Islam, Brian Boswell and A Pramanik

“An Investigation Of Dimensional

Accuracy Of Part Produce By Three-

Dimensional Printing”.

Stephen, B, Azimi.P., E.O. Zieneb., and

Ramos. T., 2013, “Ultrafine Particle

Emissions from Desktop 3D Printers”,

atmospheric environment volume 79(2013)

hal 334—339.

Yuan, L , 2008 , “A Preliminary Research on

Development of A Fiber-Composite, Curved

FDM system”, National University of

Singapore.

Andriani, D. Puspita.”Metode Taguchi-

Pengendalian Kualitas”. Program Studi

Teknik Industri Universitas Brawijaya.

Wahyu H Patricia, Wuryandari T, 2011.

“Optimalisasi Produk Dengan Menggunakan

Metode Perancangan Toleransi Taguchi.

Program Studi Statistika FMIPA, Universitas

Diponegoro.

Aman Muhammad. “Rekayasa Kualitas

Taguchi Dalam Perancangan Parameter

Kualitas Produk”. Program Studi Teknik

Industri, Fakultas Teknik-Universitas

Muhammadiyah Magelang.

Wahjudi D, Cahyono A. Rinaldi “Studi kasus

Optimasi Proses Sizing Benang di P.T XYZ”

Jurusan Teknik Mesin Fakultas Teknologi

Industri, Universitas Kristen Petra.

Wahjudi D, Gan Shu San, 2001. “Rekayasa

Mutu Besi Beton dengan Metode Tagucho”.

Jurusan Teknik Mesin Fakultas Teknologi

Industri, Universitas Kristen Petra.

5

Lee, Wei-chen. “Confirmation Experiment-

Chapter 6”. National Taiwan University of

Science Technology.

Diterbitkan

2018-12-14

Cara Mengutip

Waluyo, R. (2018). STRESS ANALYSIS PADA HORIZONTAL AXIS WIND TURBINE BLADE BERBAHAN KAYU. AME (Aplikasi Mekanika Dan Energi): Jurnal Ilmiah Teknik Mesin, 4(2), 65–75. https://doi.org/10.32832/ame.v4i2.1537

Terbitan

Bagian

Articles