Perbandingan Mutu Beton terhadap Gaya Geser dan Simpangan pada Bangunan Rutan Kejati

Authors

DOI:

https://doi.org/10.32832/komposit.v9i2.17387

Keywords:

Concrete quality, Reinforcement, structure

Abstract

This study examines the planning of high-rise building structures in Indonesia, focusing on the application of Special Moment Resisting Frame (SMRF) systems under seismic conditions. Situated within the Pacific Ring of Fire, Indonesia frequently experiences significant earthquakes due to the convergence of three continental plates. Previous research indicates that the design of high-rise buildings necessitates careful attention to dimensions and reinforcement to ensure structural strength and stability. The SMRF planning method, which applies the principle of strong column weak beam, has been analyzed across various case studies, including designs for office buildings, hotels, laboratories, and educational facilities.Furthermore, this study compares the structural performance using different concrete strengths, specifically 41.5 Mpa and 24.9 Mpa, in the construction of prison walling at the Kejati Detention Center. Through quantitative analysis and structural modeling using ETABS V.20 software, this research identifies differences in base shear and inter-story drift between the two concrete strengths. The findings provide insights into the effectiveness of higher-grade concrete usage and its potential impacts on the strength and structural quality of buildings. The implications of this research can guide practitioners in selecting the appropriate construction materials to enhance performance and cost-efficiency in high-rise building projects in Indonesia.

References

Almufid, A., & Santoso, E. (2021). Struktur SRPMK dan SRPMM pada Bangunan Tinggi (Structure of SRMK and SRMM on High Building). Jurnal Teknik, 10(1), 24–34. https://doi.org/http://dx.doi.org/10.31000/jt.v10i1.4025

Arjakoni, A. F., & Lutfi, M. (2022). Evaluasi Kinerja Seismik Pada Struktur Gedung Rumah Sakit Pendidikan Universitas Indonesia dengan Metode Analisis Pushover Berdasarkan ATC 40. Jurnal Komposit: Jurnal Ilmu-Ilmu Teknik Sipil, 4(2), 67–73. https://doi.org/10.32832/komposit.v4i2.3764

Badan Standardisasi Nasional. (2013). SNI 1727-2013 Beban Minimum untuk Perancangan Bangunan Gedung dan Struktur Lain. In Sni 1727-2013 (p. 196).

Badan Standardisasi Nasional. (2019). Standar Nasional Indonesia SNI 1726-2019 Tentang Tata cara perencanaan ketahanan gempa untuk struktur bangunan gedung dan nongedung. In Badan Standardisasi Nasional.

Ente, A. A. G., Sumajouw, M. D. J., & Wallah, S. E. (2023). Studi Komparasi Kinerja Gedung Bertingkat Sistem Ganda Rangka Pemikul Momen Khusus dan Menengah di Kota Manado. Paduraksa: Jurnal Teknik Sipil Universitas Warmadewa, 12(1), 53–65. https://doi.org/10.22225/pd.12.1.6134.53-65

Fitrah, R. A., & Melinda, A. P. (2018). Studi Komparasi Detailing Desain Komponen Lentur Struktur Beton Bertulang SRPMK dan SRPMM. Rang Teknik Journal, 1(2), 250–259. https://doi.org/https://doi.org/10.31869/rtj.v1i2.722

Handayani, J., Lutfi, M., Chayati, N., & Taqwa, F. M. L. (2019). Studi Pengaruh Temperatur Beton Massa pada Raft Foundation Ketebalan 3 Meter (Studi Kasus: Proyek MCC Tower - Jakarta). Jurnal Komposit: Jurnal Ilmu-Ilmu Teknik Sipil, 3(1), 20–22. https://doi.org/10.32832/komposit.v3i1.3743

Honarto, R. J., Handono, B. D., & Pandaleke, R. (2019). Perencanaan Bangunan Beton Bertulang dengan Sistem Rangka Pemikul Momen Khusus di Kota Manado. Jurnal Sipil Statik, 7(2), 201–208. https://ejournal.unsrat.ac.id/v2/index.php/jss/article/view/22026

Karisoh, P. H., Dupas, S. O., & Pandaleke, R. (2018). Perencanaan Struktur Gedung Beton Bertulang dengan Sistem Rangka Pemikul Momen Khusus (SRPMK). Jurnal Sipil Statik, 6(6), 361–372. https://ejournal.unsrat.ac.id/v2/index.php/jss/article/view/19859

Laily, R., Sumajouw, M. D. J., & Wallah, S. E. (2019). Perencanaan Gedung Training Center Konstruksi Beton Bertulang 4 Lantai Di Kota Manado. Jurnal Sipil Statik, 7(8), 1095–1106. https://ejournal.unsrat.ac.id/v2/index.php/jss/article/view/24514

Liando, F. J., Dapas, S. O., & Wallah, S. E. (2020). Perencanaan Struktur Beton Bertulang Gedung Kuliah 5 Lantai. Jurnal Sipil Statik, 8(4), 471–482. https://ejournal.unsrat.ac.id/v2/index.php/jss/article/view/29894

Lutfi, M., Rulhendri, R., & Salam, R. A. M. Q. (2022). Studi Perencanaan Gedung Parkir Sepeda Motor di Area Fakultas Teknik Dan Sains Universitas Ibn Khaldun Bogor. Jurnal Komposit: Jurnal Ilmu-Ilmu Teknik Sipil, 4(1), 19–26. https://doi.org/10.32832/komposit.v4i1.3749

Missi, R. S. P. J., Handono, B. D., & Sumajouw, M. D. J. (2020). Perencanaan Konstruksi Beton Bertulang untuk Gedung Parkir. Jurnal Sipil Statik, 8(3), 383–394. https://ejournal.unsrat.ac.id/v2/index.php/jss/article/view/29494

Palit, C. M., Pangouw, J. D., & Pandaleke, R. (2016). Perencanaan Struktur Gedung Hotel Jalan Martadinata Manado. Jurnal Sipil Statik, 4(4), 263–270. https://ejournal.unsrat.ac.id/v2/index.php/jss/article/view/11917

Prins, M. I., Dapas, S. O., & Wallah, S. E. (2017). Studi Komparasi Disain Struktur Bangunan Bertingkat akibat Gempa pada 5 Kota di Indonesia. Jurnal Sipil Statik, 5(7), 411–423. https://ejournal.unsrat.ac.id/v2/index.php/jss/article/view/17122

Rizki, F., & Rohman, F. (2018). Analisis Struktur Ruang Rawat Inap Kelas III Prabu Siliwangi RSUD Gunung Jati Kota Cirebon. Jurnal Konstruksi dan Infrastruktur: Teknik Sipil dan Perencanaan, 7(2), 2085–8744. https://doi.org/http://dx.doi.org/10.33603/jki.v7i2.3890

Sanusi, A. (2017). Pelaksanaan Fungsi Cabang Rumah Tahanan Negara di Luar Kementrian Hukum dan Hak Asasi Manusia. Jurnal Ilmiah Kebijakan Hukum, 10(2), 18. https://doi.org/http://dx.doi.org/10.30641/kebijakan.2016.V10.117-129

Saputra, M. R., Handono, B. D., & Mondoringin, M. R. I. A. J. (2020). Evaluasi Kinerja Gedung Fakultas Hukum Universitas Sam Ratulangi akibat Beban Gempa. Jurnal Sipil Statik, 8(5), 679–686. https://ejournal.unsrat.ac.id/v2/index.php/jss/article/view/31878

Sarassantika, I. P. E., & Hsu, H. L. (2022). Improving brace member seismic performance with amplified-deformation lever-armed dampers. Journal of Constructional Steel Research, 192, 107221. https://doi.org/10.1016/j.jcsr.2022.107221

Sarassantika, I. P. E., & Hsu, H. L. (2023). Upgrading framed structure seismic performance using steel Lever-Armed dampers in the Braces. Engineering Structures, 280(January), 115683. https://doi.org/10.1016/j.engstruct.2023.115683

Tampubolon, S. P., Sarassantika, I. P. E., & Suarjana, I. W. G. (2022). Analisis Kerusakan Struktur Bangunan dan Manajemen Bencana Akibat Gempa Bumi, Tsunami, dan Likuifaksi di Palu. Bentang: Jurnal Teoritis dan Terapan Bidang Rekayasa Sipil, 10(2), 169–186. https://doi.org/10.33558/bentang.v10i2.3263

Downloads

Published

2025-08-05

How to Cite

Ahadina, A. A. A. S. A., Sarassantika, I. P. E., Triswandana, I. W. G. E., & Aryastana, P. (2025). Perbandingan Mutu Beton terhadap Gaya Geser dan Simpangan pada Bangunan Rutan Kejati. Jurnal Komposit: Jurnal Ilmu-Ilmu Teknik Sipil, 9(2), 251–258. https://doi.org/10.32832/komposit.v9i2.17387

Issue

Vol. 9 No. 2 (2025)

Section

Articles

License

Copyright (c) 2025 Jurnal Komposit: Jurnal Ilmu-ilmu Teknik Sipil

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms (Penulis yang mengajukan publikasi artikel telah menyetujui hal berikut):

  1. Through this publication, the author agree to submit the copyright of article writing to Jurnal Komposit: Jurnal Ilmu-ilmu Teknik Sipil. This copyright submission takes the form of, but is not limited to: reproduction of the article and parts therein, including photographic reproductions; distribution of articles through printed and electronic documents; and translation of articles(Bahwa melalui publikasi ini, hak cipta penulisan artikel diserahkan kepada Jurnal Komposit: Jurnal Ilmu-ilmu Teknik Sipil. Penyerahan hak cipta ini berupa, namun tidak terbatas pada: perbanyakan artikel dan bagian di dalamnya, termasuk reproduksi fotografi; penyebarluasan artikel melalui dokumen cetak dan elektronik; serta penterjemahan artikel).
  2. The authors agree to the terms of the Copyright Notice, according to Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License., which will apply to this article if and when it is published by Jurnal Komposit: Jurnal Ilmu-ilmu Teknik Sipil. (Para penulis setuju dengan ketentuan Pemberitahuan Hak Cipta, sesuai dengan Lisensi Internasional Creative Commons Attribution-NonCommercial-ShareAlike 4.0., yang akan berlaku untuk artikel ini jika dan ketika diterbitkan oleh Jurnal Komposit: Jurnal Ilmu-ilmu Teknik Sipil).

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.