Pengaruh Penggunaan Polyethylene Terephthalate sebagai Agregat Halus terhadap Kuat Lentur Beton
DOI:
https://doi.org/10.32832/komposit.v8i2.15097Keywords:
concrete mixture, Flexural Strength, PET plasticsAbstract
The use of plastic in the city of Balikpapan in currently often used in daily activities, causing plastic waste in the city of Balikpapan to contribute up to 17% of the total waste production. The use of plastic in the world of construction has begun by using PET (Polyethylene Terephthalate) plastic as a concrete mixture. With its utilization, it can be a solution to reduce the production of plastic waste in the city of Balikpapan. In this research, PET plastic was used as a concrete mixture with a percentage of 0.7% and combined with local materials from East Kalimantan as a form of supporting the relocation of the state capital to East Kalimantan province. The purpose of this study was to determine the effect of using PET type plastic as fine aggregate on the flexural strength of concrete. The method used in this study is the experimental method with a test sample measuring 15x15x60 cm. The test results showed that normal concrete got a slump value of 10 cm and the PET variation was 7% 9 cm with the flexural strength test results of normal concrete with a curing period of 14 and 28 days getting a value of 3,044 MPa and 3,188 MPa, PET variations of 0.7% 14 and 28 days got a value of 2,370 MPa and 2,423 MPa, based on the results of this study it can be concluded that the use of PET plastic as fine aggregate experienced a decrease in the quality and weight of the sample due to the smooth and slippery texture of PET plastic causing the concrete mixing process to be poor.
References
Achmad, K. (2016). Pasir Kandilo dan Kerikil Petangis Sebagai Material Local Tanah Grogot dalam Campuran Beton. Media Teknik Sipil, 13(2), 2-5. doi:https://doi.org/10.22219/jmts.v13i2.2561
Amibo, T. A., Abreham, B. B., & Desalegn, A. A. (2021). Polyethylene Terephthalate Waste As A Partial Replacement For Fine Aggregates In Concrete Mix, Case Of Jimma Town, South West Ethiopia. Sriwijaya Journal Of Environment, 20-35. http://dx.doi.org/10.22135/sje.2021.6.1.20-35
Indriani, A. M., Sugianto, A. (2016). Pengaruh Rasio Tinggi Blok Tegangan Tekan dan Tinggi Efektif terhadap Lentur Balok Bertulangan Tunggal. Jurnal Teknologi Terpadu, 5(1), 219-234. doi: https://doi.org/10.32487/jtt.v5i1.220
Apriyanto, H. (2010). Kapasitas Geser Balok Beton Bertulang dengan Polypropylene Fiber Sebesar 4% dari Volume Beton. Jurnal Teknik Sipil & Perencanaan, 12(2), 161-172. doi: https://doi.org/10.15294/jtsp.v12i2.1349
Armidion, R., & Rahayu, T. (2018). Peningkatan Nilai Kuat Tarik Belah Beton dengan Campuran Limbah Botol Plastik Polyetylene Terephthalate (PET). Jurnal Konstruksia, 10(1), 117-126. doi: https://doi.org/10.24853/jk.10.1.117-126.
Asrar, A., Bachtiar, E., Gusty, S., Rachim, F., Ritnawati, R., & Setiawan, A. (2020). Pemanfaatan Daur Ulang Limbah Botol Plastik Polyethylene Terephthalate (PET) Sebagai Pengganti Agregat Kasar Pada Beton. Jurnal Kacapuri: Jurnal Keilmuan Teknik Sipil, 3(2), 156-164. doi: dx.doi.org/10.31602/jk.v3i2.4076
Bachtiar, E., Muzakkir, M., Takwin, Gusty, S., & Khaerat, N. (2021). Kuat Tekan Dan Tarik Belah Pada Beton Yang Menggunakan Agregat Kasar Limbah Plastik. Jurnal Rekayasa Sipil, 15(1). doi: https://doi.org/10.21776/ub.rekayasasipil.2021.015.01.
Baskara, S. D., Nurdiana, B., & Setiabudi, B. (2022). Penggantian Parsial Semen dari Ampas Kopi dan Agregat Kasar dari Limbah Plastik PET pada Campuran Beton. Jurnal Proyek Teknik Sipil, 9-15. doi:https://doi.org/10.14710/potensi.2022.16560
Hamid, R. M., Rahman, T., & Budiman, E. (2023). Penggunaan Sampah Plastik PET Sebagai Pengganti Sebagian Agregat Kasar Palu Pada Beton. Junal Teknologi Sipil, 7(1), 63-71. doi: http://dx.doi.org/10.30872/ts.v7i1.11234
Handayasari, I. (2017). Studi Alternatif Bahan Konstruksi Ramah Lingkungan dengan Pemanfaatan Limbah Plastik Kemasan Air Mineral Pada Campuran Beton. Jurnal Politeknologi, 16(1). doi: https://doi.org/10.32722/pt.Vol16.No.1.2017.pp
Hermansyah , H., & Rikayasa , R. (2023). Pembuatan Batako Menggunakan Plastik PET (Polyethylene Terephthalate) sebagai Bahan Pengganti Pasir untuk Menentukan Nilai Kuat Tekan. Jurnal Teknik Industri Terintegrasi (Jutin), 6(3), 448-454. doi: https://doi.org/10.31004/jutin.v6i3.15835
Kamaliah, K., & Handayani, N. (2020). Pemanfaatan Limbah Plastik Jenis PET (Poly Ethylene Terephthalate) pada Pembuatan Beton Mutu Rendah di Kota Palangka Raya. Media Ilmiah Teknik Lingkungan, 5(1). doi: https://doi.org/10.33084/mitl.v5i1.1347
Liang, M. (den 14 February 2022). Kajian Pengelolaan Sampah Plastik Sekali Pakai di Kota Balikpapan. Hämtat från Repository ITS: http://repository.its.ac.id/id/eprint/93830
Mulyadi, A., Diawarman, & Ismail, D. (2018). Pengaruh Penambahan Limbah Plastik terhadap Kuat Tekan Mutu Beton K-175. Jurnal Teknik Sipil Unpal, 8(2). doi: https://doi.org/10.36546/tekniksipil.v8i2.12
Pirdaus, P., & Raka, A. A. (2019). Pengaruh Penambahan Limbah Plastik Polyethylene Terepthalate (PET) terhadap Kuat Tekan dan Kuat Lentur pada Paving Block.
Respati, S. W., & Achmad, R. (2017). Pengaruh Arah Serat Carbon Fiber Reinforced Polymer Terhadap Kuat Tekan Beton Normal Menggunakan Material Lokal Pasir Samboja di Wilayah Kalimantan Timur. Jurnal Teknologi Terpadu, 5(1). doi: https://doi.org/10.32487/jtt.v5i1.206
Umasabor, R. J., & Daniel, S. C. (2020). The Effect of Using Polyethylene Terephthalate as An Additive on the Flexural and Compressive Strength of Concrete. Heliyon, 6(8). doi: https://doi.org/10.1016/j.heliyon.2020.e04700.
Widiarini, M. R. (2023). Pengaruh Penambahan Limbah Plastik Botol Air Mineral terhadap Kuat Tekan, Kuat Tarik dan Kuat Lentur Beton. Dspace UII: https://dspace.uii.ac.id/handle/123456789/42662
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Jurnal Komposit: Jurnal Ilmu-ilmu Teknik Sipil
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms (Penulis yang mengajukan publikasi artikel telah menyetujui hal berikut):
- Through this publication, the author agree to submit the copyright of article writing to Jurnal Komposit: Jurnal Ilmu-ilmu Teknik Sipil. This copyright submission takes the form of, but is not limited to: reproduction of the article and parts therein, including photographic reproductions; distribution of articles through printed and electronic documents; and translation of articles(Bahwa melalui publikasi ini, hak cipta penulisan artikel diserahkan kepada Jurnal Komposit: Jurnal Ilmu-ilmu Teknik Sipil. Penyerahan hak cipta ini berupa, namun tidak terbatas pada: perbanyakan artikel dan bagian di dalamnya, termasuk reproduksi fotografi; penyebarluasan artikel melalui dokumen cetak dan elektronik; serta penterjemahan artikel).
- The authors agree to the terms of the Copyright Notice, according to Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License., which will apply to this article if and when it is published by Jurnal Komposit: Jurnal Ilmu-ilmu Teknik Sipil. (Para penulis setuju dengan ketentuan Pemberitahuan Hak Cipta, sesuai dengan Lisensi Internasional Creative Commons Attribution-NonCommercial-ShareAlike 4.0., yang akan berlaku untuk artikel ini jika dan ketika diterbitkan oleh Jurnal Komposit: Jurnal Ilmu-ilmu Teknik Sipil).
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.